Where Is The Fresh Air Filter On 2017 Equinox

Other Products for Your Vehicle

Product Description

FRAM® Fresh Breeze motel air filters can continue up to 98% of road dust and pollen particles from entering a vehicle. The only cabin air filter that uses the natural deodorizing backdrop of ARM & HAMMER™ baking soda. Contaminants that enter the vehicle with outside air through the vehicle's air conditioning, heating and ventilation system can get full-bodied and betrayal passengers to road dust, dirt and allergens at higher levels than exterior the car.

Filters up to 98% of dust, pollen and other contaminants
ARM & HAMMER baking soda combined with carbon embedded in the filter assists in cleaning exterior air flowing through the vehicle'due south ventilation system
Helps protect your vehicle's heating and air workout unit while also keeping information technology working efficiently
Installs on average in 15 minutes

Product Specs

Length	8.904
Width	9.968
Height	0.788
Installation Time	10
Location	Behind Glove Box

Where to Purchase

Installation Instructions

View Components

Installation Instructions

Available written instructions for this production and some applications are below.

Instructions may not exactly match your vehicle.

For best experience, please employ video instructions where applicable.

TOOLS: Phillips-head Screwdriver.

LOCATION OF Cabin FILTER: Nether the dash on the passenger side of the vehicle behind the glove box.

REMOVE ALL DEBRIS IN AND Around FILTER LOCATION.

While sitting in the passenger seat, open the glove box.
Remove the iii screws securing the top of the glove box assembly.
Close the glove box and remove the three screws securing the bottom of the associates.
Gently pull outward on the glove box assembly unit of measurement until y'all release the 3 clips that secure information technology. The assembly is held in place by three metal clips – i on the left side and two on the right side.
Set the whole assembly aside and out of your working expanse.
Locate the cabin filter housing access door (the door is secured with latches), unlatch, and open up.
Remove sometime cabin filter by pulling straight out.
Supersede with new cabin filter.
Close filter access door by securing latches.
Marshal the clips on the glove box assembly with the slots located on the frame surrounding the glove box and gently push back into place.
With the glove box open, align the holes and re-insert the acme three screws.
Close the glove box and re-insert the bottom three screws.

Download PDF Instructions

TOOLS: None required.

LOCATION OF CABIN FILTER: Behind the glove box on the rider side of the vehicle.

REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.

Open up glove box.
Remove the two stops on either end of the inside of the glove box. These stops are removed past turning them counterclockwise. Once they are removed the glove box should swing down.
Unlatch the motel filter comprehend on the right manus side and remove it.
Remove the dirty filter by pulling it straight out.
Install the new filter.
Re-install the motel filter cover and make sure it is latched on the right hand side of the cover.
Partially close the glove box and re-install the stops on each side of the glove box by placing them back in the pigsty and turning them clockwise.
Shut the glove box.

Download PDF Instructions

1. Road grit and pollen particles ranging in size from five-100 microns.
2. Deodorizing tests used isovaleric acrid (sweaty odors), geosmin (earthy odors) and domestic dog hairs.
iii. ARM & HAMMER, the ARM & HAMMER logo and singled-out orange trade dress are trademarks of Church building & Dwight Co., Inc. and used under license by FRAM Group IP LLC.
* E'er follow OE recommended change intervals.